Plastic finishing boards

Plastic finishing boards are among the most popular modern finishing materials.

They can be used at residential, administrative and non-residential premises (kitchens, bathrooms, dining-rooms, children’s rooms, corridors, offices, attics, garages and even non-heated garden houses).

It would be difficult to find a more suitable material for installation at premises with high moisture levels. Such finishing boards are not suitable only for the premises where the temperature may rise above +70°C. Plastic finishing boards can be used either on ceilings or on walls.

They can be glued or hammered on a framework attached to masonry or concrete walls without performing any additional finishing works (plastering, daubing, painting or papering), which accelerates the process of installation or repair of the domestic premises. Moreover, you will have no difficulty with the installation of boards yourselves by saving quite a little on this.

• Resistant to moisture and temperature fluctuations;
• Inexpensive, durable, practical;
• Can be installed on any surface;
• Very light in weight, do not encumber the structures;
• Easy and quick installation;
• No problems with the “insertion” of lamps, ventilation lattices, etc;
• Economic: the length of 6 meters allows reduction of waste to the minimum;
• Aesthetic and modern looks;
• Do not require any special care;
• Easy to clean.

You can install plastic coated boards on any surface. In case of uneven walls or ceilings, you must firstly assemble a carcass made of plastic profiles or ledges of boards. Intervals between plastic profiles must not exceed 50 cm. Fastening of coated boards with nails, hooks, special plates or by gluing. Plastic coated boards must be 3 - 5 mm shorter for lengths changes during thermal changes. If assembled plastic coated boards have a static charge and do attract dust then please use some antistatic preparation. We recommend doing assembling works by temperature no lower as +5°C.

Robust, water resistant, without additional treatment, fastened on the wall with nails or wood screws.

Fasteners of finishing boards

Finishing boards, fastened with fasteners (clamps) does have possibility to move during temperature variations. Clamps, pressed from above, firmly hook on the profile. For a change of temporally construction or repair-works these clamps will be easy separated if pulled to side. The clamps, folded with pliers, are suitable for fastening of the suspended ceilings.

Attention!
Please present claims with respect to plastic coated boards before assembling work.

 

UAB „Lėdis“, Palazdinės k., LT-32101, Zarasai, Lietuva
ledis@ledis.lt