Mounting profile

Plastic mounting profile for walls and ceilings in PVC shell plating installation.

Because of environmental fluctuations wood lumber loses its form. The moisture is the reason why wood is rotting in consiquence. Plastic profile service life is unlimited, the plastic is not afraid of moisture, does not require conservation. Plastic profile is quickly and easily installed.
Length: 3 m.

You can install plastic coated boards on any surface. In case of uneven walls or ceilings, you must firstly assemble a carcass made of plastic profiles or ledges of boards. Intervals between plastic profiles must not exceed 50 cm. Fastening of coated boards with nails, hooks, special plates or by gluing. Plastic coated boards must be 3 - 5 mm shorter for lengths changes during thermal changes. If assembled plastic coated boards have a static charge and do attract dust then please use some antistatic preparation. We recommend doing assembling works by temperature no lower as +5°C.

Robust, water resistant, without additional treatment, fastened on the wall with nails or wood screws.

Fasteners of finishing boards

Finishing boards, fastened with fasteners (clamps) have possibility to move during temperature variations. Clamps, pressed from above, firmly hook on the profile. For a change of temporally construction or repair-works these clamps will be easy separated if are pulled to side. The clamps, folded with pliers, are suitable for fastening of the suspended ceilings.

Attention!   
Please present claims with respect to plastic coated boards before assembling work.

 

 

UAB „Lėdis“, Palazdinės k., LT-32101, Zarasai, Lietuva
ledis@ledis.lt